Troubleshooting

LED Indication

For the first time ever, troubleshooting your blast setup is quick and easy. The LEDs on each device tell you all you need to know

Here's the summary

Yellow: not connected
Green: connected
Blue: blasting

Pot won't turn on? Check the following

1. Are the devices paired?

If so, the LED's on both devices should be green.

2. Is the deadman switch working?

If so, the Transmitter LED should turn blue when the deadman is pressed.

3. Is the wireless system functional?

If so, the Receiver LED should turn blue when the deadman is pressed.

Pot still won't turn on?

  1. Ensure your solenoid has power
    The Receiver twist lock output is just a switch, the pot supplies the power for the solenoid like normal

  2. Check where the Receiver was connected
    The Receiver should connect to the same plug as where a wired deadman switch would connect

Want us to take a look?

If you're device has been damaged, no worries, let's get you back to normal.

Repair my device

For any other questions, reach out below

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.