Troubleshooting

LED Indication

For the first time ever, troubleshooting your blast setup is quick and easy. The LEDs on each device tell you all you need to know.

Here's the summary:

  • Yellow: not connected
  • Green: connected
  • Blue: blasting

Pot won't turn on? Check the following

  • 1. Are the devices paired?

    If so, the LED's on both devices should be green.

  • 2. Is the deadman switch working?

    If so, the Transmitter LED should turn blue when the deadman is pressed.

  • 3. Is the wireless system functional?

    If so, the Receiver LED should turn blue when the deadman is pressed.

Next up check this:

4. Ensure your solenoid has power
The Pot Receiver twist lock output is just a switch, therefore the pot solenoid requires external power just as it does with a wired connection.

5. Check where the Receiver was connected
The Pot Receiver should connect to the same plug as where a wired deadman switch would connect.

Easy as that. Let us know if you need a hand